| | |
Kopter Case(Reference #2544)
Carry case for 450 size helis.Blue Silver with carry strap and full foam inlay. <more>
Price: £34.03 £39.99 Including VAT at 17.5%
|  |
|
 |
Deans Connector(Reference #1301)
These connectors are the Genuine Ultra Deans1 Pack of 2 male and 2 female Ultra Deans Connectors
Price: £6.80 £7.99 Including VAT at 17.5%
|  |
|
|
Medusa 3.5amp 5 volt BEC(Reference #1969)
Max Voltage input:45Volts, Min Voltage Input:8VoltsCont Current:3.5Amps, Peak Current:4.5Amps! Max Servos: 8 servos W:30mm, L:50mm, T:13mm Weight: Only 13gms Output to Servos 5.0 volt, 12 to 33 Nicad/Nimh cells or 3 to 10 Lipo Cells.
Price: £28.51 £33.50 Including VAT at 17.5%
|  |
|
|
Medusa 3.5amp 6volt BEC(Reference #1925)
Max Voltage input:45VoltsMin Voltage Input:8Volts Cont Current:3.5Amps Peak Current:4.5Amps! Max Servos: 8 servos W:30mm, L:50mm, T:13mm Weight: Only 13gms Output to Servos 6.0 volt, for optimum power and speed; please ensure your onboard radio gear is suitable for this voltage 12 to 33 Nicad/Nimh cells or 3 to 10 Lipo Cells. more
Price: £28.51 £33.50 Including VAT at 17.5%
|  |
|
|
Medusa 2amp 5 volt BEC(Reference #1926)
Medusa Research's Battery Eliminator Circuits eliminate the need for a separate battery pack to run the receiver and servos by stepping down the voltage of the main battery. Output to Servos 5.0 volt : suitable for all radio applications W: 20mm, L: 22mm, T: 10mm Weight only 10gms Ideally suited to power upto 5 servos having a constant current rating of 2Amps with a peak rating of 2.4 Amps. Takes input from 5V to 35Volts max hence suited for 6 to 25 nicad /Nimh cells or 2 to 8 Lipo cells more
Price: £20.00 £23.50 Including VAT at 17.5%
| |
|
|
Medusa 2amp 6volt BEC(Reference #1927)
Medusa Research's Battery Eliminator Circuits eliminate the need for a separate battery pack to run the receiver and servos by stepping down the voltage of the main battery. Output to Servos 6.0 volt : for optimum power and speed. please ensure your onboard radio gear is suitable for this voltage W: 20mm, L: 22mm, T: 10mm Weight only 10gms Ideally suited to power upto 5 servos having a constant current rating of 2Amps with a peak rating of 2.4 Amps. Takes input from 5V to 35Volts max hence suited for 6 to 25 nicad /Nimh cells or 2 to 8 Lipo cells more
Price: £20.00 £23.50 Including VAT at 17.5%
| |
|
|
Kontronik BEC30(Reference #1032)
High Voltage BEC from16 to 30 cells / 10S The output voltage of the BEC30 is 5,6V. That's more than the usual 5V, for better use of power and speed of your servos. It retains enough reserve from 6V, which is the usual limit for receiver components. The incredible peak current of 5A for 30s and 3A cont. current offers enough power up to 10 servos. No bother with heat build up due to switch mode power supply Equipped with protections against reversal polarity, short circuit, overload and high temperature the BEC30 is nearly unbreakable
Price: £34.00 £39.95 Including VAT at 17.5%
|  |
|
|
Alum. Carry Case for Zoom 400 and others(Reference #1015)
Aluminium Carry Case for the Zoom 400 and other small helis. Space for Kit, Radio, Batteries etc. External dimensions:- 200 x 265 x 865mm nb: heli and radio are shown for size comparison and are not supplied
Price: £51.03 £59.96 Including VAT at 17.5%
|  |
|
|
Micro Heli Pitch Gauge(Reference #976)
Micro Heli Pitch GuageIdeal for T Rex and Zoom Pitch gauge:+12/-12 Dimensions:length137.3mm,width48mm Weight:26g
Price: £9.35 £10.99 Including VAT at 17.5%
|  |
|
|
Micro Heli pitch Gauge with level(Reference #5)
Comes with integrated bubble level for more acurate settings.
Price: £6.38 £7.50 Including VAT at 17.5%
|  |
|
|
Pinion Gear Puller std(Reference #818)
Pinion Gear Puller stdIdeal tool to remove pinion gears from brushed and brushless electric motors without damage For motor shaft dia's 2.0>3.2mm
Price: £7.62 £8.95 Including VAT at 17.5%
|  |
|
|
Pinion Gear Puller micro(Reference #817)
Pinion Gear PullerIdeal tool to remove pinion gears from brushed and brushless electric motors without damage For motor shaft dia's 1.0>2.2mm
Price: £7.62 £8.95 Including VAT at 17.5%
|  |
|
|
Watts Up by Modelavionics(Reference #977)
Watt Meter and Power Analyzer for Electric Flight.Can be used on or off the model. Measures:- Volts and amps- constantly updating. Watt Hrs. - total energy used during the flight. Peak Watts - max power delivered during the flight. Invaluable diagnostic aid for all electric flight. Can also be used to accurately measure the charge capacity and energy capacity of your packs. more
Price: £42.50 £49.94 Including VAT at 17.5%
|  |
|
|
Hyper BEC(Reference #978)
Technical Specifications: HyperBEC 555 Dimensions: 34 x 28 x 16 mm, Weight: 15 gm approx. Battery: 6--12 cells (series) NiCd/NiMH or 2--4 cells (series) LiIon/LiPo, Any number of parallel cells. Nominal Output Voltage: 5.5 Volts Output Current: 5 Amp continuous, 7 Amp peak Low-battery Performance: 4.5 V out for 5.0 V in at 5 Amp. Overcurrent Protection: Current-limited output (appx 7.5A) Input Protection: Reverse and overvoltage protected Thermal Protection: Automatic switch-off on overheat Approvals: Meets relevant CE specifications more
Price: £16.98 £19.95 Including VAT at 17.5%
|  |
|
|
HV Hyper BEC 555(Reference #979)
Technical Specifications: HyperBEC 555HV Dimensions: 34 x 53 x 16 mm, Weight: 26 gm approx. Battery: 6--20 cells (series) NiCd/NiMH or 2--7 cells (series) LiIon/LiPo Any number of parallel cells. Nominal Output Voltage: 5.5 Volts Output Current: 5 Amp continuous, 7 Amp peak Low-battery Performance: 4.5 V out for 5.0 V in at 5 Amp. Overcurrent Protection: Current-limited output (appx 7.5A) Input Protection: Reverse and overvoltage protected Thermal Protection: Automatic switch-off on overheat Approvals: Meets relevant CE specifications
Price: £18.68 £21.95 Including VAT at 17.5%
| |
|
|
Li-Po Battery Management Unit 234(Reference #539)
Thinking of using Lithium Batteries?The Lithimon 234 is a sophisticated battery monitor which helps prevent over-discharging of the battery and consequent battery damage. Three ultra-bright LEDs, visible at a distance even in daylight, show the battery status, and an 85 decibel audible 'Land Now!' alarm activates when the battery reaches its limit. The battery monitor can be configured for 2, 3 or 4 cells (7.2, 10.8 or 14.4 Volts) and has three selectable discharge responses for moderate, heavy or very heavy current drain applications. An on-board microprocessor uses a sophisticated measurement technique (10-bit ADC with 64 x oversampling) to obtain an accurate, stable battery level measurement --- despite the peaks and surges from the ESC and motors, which would defeat a simple voltage monitor. Lithimon 234 can pay for itself many times over by preventing damaged batteries and by allowing Lithium batteries to be used to their full capacity without the ravages of the Peak Pulse Effect. more
Price: £15.28 £17.95 Including VAT at 17.5%
|  |
|
|
Li-Po Battery Management - 5678 High Voltage(Reference #607)
Price: £16.98 £19.95 Including VAT at 17.5%
|
|
| Lithimon 5678 Similar specification to the 234 but for higher voltage packs 5,6,7,or 8cells - 18, 21.6, 25.2 or 28.8 volts more info
|
|
Li-Po Battery Management - 9012 High Voltage(Reference #602)
Price: £16.98 £19.95 Including VAT at 17.5%
|
|
| Lithimon 9012 Same spcification as the 234 but for higher voltage packs 9,10,11,or12 S 32.4v > 43.2v
|
|
Spartan G4 Li-Po Guard(Reference #981)
The LipoGuard G4 is an advanced battery warning device.which will provide a simple and clear visual indication in all weather conditions, and can be easily seen on the brightest of days more info
Price: £29.75 £34.96 Including VAT at 17.5%
|  |
|
|
4mm gold Connectors 10 pairs(Reference #980)
Price: £12.72 £14.95 Including VAT at 17.5%
|
|
| High Quality 4mm Gold Connectors These connectors are able to withstand up to 70amps with low contact resistance.
|
