| | |
Trex450 swashplate set up tool(Reference #1400)
The perfect tool for setting the swashplate in the center of it's travel insuring equal swashplate travel above and below zero degrees of pitch.FMP1169
Price: £5.10 £5.99 Including VAT at 17.5%
|  |
|
 |
Trex500 swashplate set up tool(Reference #3166)
The Trex 500 Swashplate set up tool fits between the upper bearing block and the swashplate to insure the swashplate is in the EXACT mid range of travel and the swashplate is level. Each swashplate set up tool is CNC machine insuring it accuracy!! This is an absolute must have tool to insure your set up is accurate from the beginning. Also, use this tool to set the swashplate and linkages in the same place after a crash to rapidly restore your previous set up!!
Price: £5.95 £6.99 Including VAT at 17.5%
|  |
|
|
Trex600 swashplate set up tool. (Reference #1387)
The perfect tool for setting the swashplate in the center of it's travel insuring equal swashplate travel above and below zero degrees of pitch FMP1170
Price: £5.95 £6.99 Including VAT at 17.5%
|  |
|
|
TREX 600 "TREX" vertical fin(Reference #1348)
Show off your Trex600 with this new "TREX" vertical fin. G10 material FMP1178
Price: £5.95 £6.99 Including VAT at 17.5%
|  |
|
|
Trex600 Canopy standoffs and canopy screws (Reference #1302)
During agressive 3D manuevers, the canopy can become loose and even come off, often resulting in a crash! The new FMP canopy standoff's and canopy screws work together to hold the canopy tight preventing movement during flight.
Price: £6.76 £7.94 Including VAT at 17.5%
|  |
Colour
|
|
Tx Cyclic Rings(Reference #1781)
Avaliable for both JR and Futaba transmitters. <More>
Price: £7.62 £8.95 Including VAT at 17.5%
|  |
Choice
|
|
Spiral Wrap 3/16(Reference #1782)
3/16" (4.5mm) For single Servo Wires. 4' (1.2m) long <More>
Price: £2.54 £2.98 Including VAT at 17.5%
|  |
Colour
|
|
Spiral Wrap 1/4(Reference #1783)
1/4" (6mmm)For 2 or more Servo Wires or Fuel Line 4' (1.2m) long <More>
Price: £2.54 £2.98 Including VAT at 17.5%
|  |
Colour
|
|
FMP One Wrap Velcro(Reference #2488)
3/8 x 36" (10mm x 915m)Use for holding servo and radio wiring, batteries, speed controllers, wiring and fuel lines. One wrap velcro holds them securely in place without damage Also, a great choice for holding receivers, speed controllers,or anything that requires a secure installation but yet can be removed quickly without tools. Can also be used as a secondary safety strap for helicopter gyros. Ideal for holding flight batteries in Trex, Henseleit, Mikado etc. <More>
Price: £1.69 £1.99 Including VAT at 17.5%
|  |
colour
|
|
FMP Braid(Reference #2489)
Braided wire protection sleeve kits. Each kit contains 5 ft of braided wire protection sleeving and 10 color matching heat shrink collars. Available in Black,Red,Blue,Yellow,Green,Orange and special heat resistant White. The perfect way to protect servo and other radio wiring from damage on plastic, G10 and carbo fiber frames and radio trays. Can also be used to protect LiPo battery wiring and critical electronic control unit wiring on turbine powered models and fuel lines,too. <more>
Price: £3.83 £4.50 Including VAT at 17.5%
|  |
Colour
|
|
FMP Wiring Retainers(Reference #2491)
In pkts of 10.ideal for tidying up wiring and fuel lines
Price: £4.25 £4.99 Including VAT at 17.5%
|  |
|
|
Raptor Canopy Screws(Reference #1784)
Includes standoff’s and attaching hardware. Available in Blue, Red, White, Black and Yellow. <More>
Price: £5.06 £5.95 Including VAT at 17.5%
|  |
colour
|
|
Rap Canopy Latch(Reference #1785)
During backward flight and 3D, the Raptor canopy can move upward by pivoting on the rear canopy post. This can cause interference with the movement of the swash plate and ultimately a crash. The FMP Raptor canopy latch screws helps insure the canopy will stay in the locked position. <More>
Price: £2.51 £2.95 Including VAT at 17.5%
|  |
|
|
FMP Ball Links(Reference #1786)
FMP Rocket City Ball Links <More>
Price: £2.98 £3.50 Including VAT at 17.5%
|  |
size
|
|
Ultra Link Steel Balls (10)(Reference #1794)
Ultra Ball Link Ball: Want the ultimate in control system precision? Use the Ultra ball links with the FMP ultra ball link ball. When used with the Ultra Ball Link, there is nearly zero play between the ball link and ball, but yet there is nearly zero friction between the ball link and ball too! It’s amazing! Available with 2mm or 3mm I.D. center hole. more
Price: £3.36 £3.95 Including VAT at 17.5%
|  |
size
|
|
FMP Landing Gear Wedge(Reference #1795)
Shim designed to offset the tilt or roll caused by tail rotor thrust offset <More>
Price: £7.23 £8.50 Including VAT at 17.5%
|  |
|
|
FMP Fuel lineT's and Plugs (2)(Reference #1810)
Ideal for most fuel line applicationsnb: picture for application purposes only The package contains 2 'T' pieces and 2 plugs <More>
Price: £2.08 £2.44 Including VAT at 17.5%
|  |
colour
|
|
FMP Swash Level(Reference #2490)
This Precision CNC swash plate leveling tool is an invaluable device used during the setup of any model helicopter. This tool is used to set and check the swash plate remains level during its range of travel. It is not uncommon to find the swash plate is level at one setting, but moves from this position at various places through out its range of travel. This is common on all helicopters, but even more pronounced on helicopters utilizing CCPM collective systems. This will be more noticeable at the extremes of the travel range such at full positive and full negative pitch. <more>
Price: £8.94 £10.50 Including VAT at 17.5%
|  |
|
|
FMP Heat Shrink Tubing 1.5mm(Reference #2492)
1/16" (1.5mm)heat Shrink Tubing.The perfect size for repairing micro, miniature and standard size servo and radio wiring. Contains color matching heat shrink tubing for JR, Spektrum, Futaba and Hitec servos and wiring. Includes 6 pcs of heat shrink tubing 4" (100mm) long
Price: £1.91 £2.24 Including VAT at 17.5%
|  |
|
|
FMP Heat Shrink Tubing 2.25mm(Reference #2493)
3/32" (2.25mm) Heat Shrink Tubing.The perfect size for repairing heavy duty size servo and radio wiring. Contains color matching heat shrink tubing for JR, Spektrum, Futaba and Hitec servos and wiring. Includes 6 pcs of heat shrink tubing 4" (100mm) long
Price: £1.96 £2.30 Including VAT at 17.5%
|  |
|
|
FMP Heat Shrink Tubing 3.0mm(Reference #2494)
1/8" (3.0mm) Heat Shrink Tubing.The perfect size for repairing of small electric motors, batteries and speed controllers. Includes 6 pcs of heat shrink tubing 4" (100mm) long
Price: £1.96 £2.30 Including VAT at 17.5%
|  |
|
|
FMP Heat Shrink Tubing 4.75mm(Reference #2495)
3/16" (4.75mm) Heat shrink Tubing.The perfect size for repairing battery, motor and speed controllers on small electric models. Contains color matching heat shrink tubing to match many popular motors and speed controllers, such as the Trex 450 Includes 7 pcs of heat shrink tubing 4" (100mm)long.
Price: £2.26 £2.66 Including VAT at 17.5%
|  |
|
|
FMP Heat Shrink Tubing 6.0mm(Reference #2496)
1/4" (6.0mm) Heat Shrink Tubing.Matches colors and size of our Braided wire protection Kits. Also used for repair of high out put motors, batteries and speed controllers on larger models, such as the Trex600. Mikado Henseleit etc. Includes 7 pcs of heat shrink tubing. Each piece is 4" (100mm) long
Price: £2.26 £2.66 Including VAT at 17.5%
|  |
|
