| | |
Rap 90 auto unit(Reference #1863)
Autorotation Hub - R6D-04NEW - HEAVY DUTY AUTOROTATION HUB This hub represents a total redesign over the original TT unit and features a very high quality German one-way clutch bearing that incorporates twin needle roller support bearings in place of the plain bushes used by TT. A new 18mm hardened steel core allows the use of the larger clutch bearing giving a 30% increase in torque handling. The hub body now fits to the top face of the maingear allowing for increased wall thickness and rigidity whilst a separate reinforcing ring attaches to the gear underside to prevent distortion. Despite the increased proportions of this unit we have actually engineered a 7% reduction in weight compared to the standard TT unit with the steel reinforcing ring ! Supplied with full fitting instructions and compatible with all types of maingear options and available in Cool Blue or Satin Silver finish.
Price: £42.51 £49.95 Including VAT at 17.5%
|  |
Colour
|
 |
Rap 60>90 Head Combo(Reference #1939)
SPECIAL - HEAD COMBO PACKWe are pleased to be able to offer a special combo package price on our very popular Raptor rotor head parts. Our "combo package" contains headblock, blade grips,in-line flybar arm, flybar carrier, head button and Bell - Hiller mixer arms at a price that represents more than 20% saving over the cost of purchasing the individual components. Available in blue and new "satin silver" finish. NOTE: Picture shows swashplate and washout unit for illustrative purposes only, these are NOT included in the head combo pack.
Price: £153.15 £179.95 Including VAT at 17.5%
|  |
colour
|
|
Rap 60>90 Swash Plate(Reference #1940)
This superb quality fully cnc machined swashplate uses a high quality radial bearing and an aviation grade PTFE lined chrome steel centre swivel ball. The main bearing features special pre-load adjusters to eliminate any play and allow future re-tensioning.Hardened steel control balls with M3 fittings, a must for any serious flyer.. Available in Cool Blue or Satin Silver
Price: £42.51 £49.95 Including VAT at 17.5%
|  |
colour
|
|
Rap 60>90 Wash Out Base(Reference #1941)
Washout Unit - R6C-01A complete washout assembly that replaces the stock plastic unit. CNC machined alloy control arms have twin sealed ballraces and high tensile M3 control hardware. Alloy washout base features precision bored brass sleeve for a smooth and long lasting slide action. Supplied complete with replacement drive arms with hardened ground pivot pins Available in Cool Blue and Satin Silver Finish
Price: £38.25 £44.94 Including VAT at 17.5%
|  |
colour
|
|
Rap 60>90 Upper Mast Block(Reference #1942)
Upper Mast Bearing Block - R6D-02Machined from solid alloy, this upper mast bearing block provides substantial additional bracing helping to prevent upper frame flexing and the associated vibration. A high load Japanese specification bearing is used for smooth running and long life. Available in Cool Blue or Satin Silver
Price: £16.98 £19.95 Including VAT at 17.5%
|  |
colour
|
|
Rap 60>90 Lower Mast Block(Reference #1943)
Lower Mast Bearing Block - R6D-03A matching lower bearing block to compliment the upper unit. Designed to give maximum mounting face area to resist frame flex and twist whilst being as light as possible. A high load Japanese specification bearing is used for smooth running and long life. Available in Cool Blue or Satin Silver
Price: £21.23 £24.95 Including VAT at 17.5%
|  |
colour
|
|
Rap 60>90 Fan Unit(Reference #1944)
Alloy Cooling Fan - R6D-07Superb CNC machined high efficiency alloy cooling fan for the Raptor 60/90 Incorporates split collet fitting system to suit OS 61 - 70 & 90 type crankshaft and GV-1 type governor magnet holders. Up to 35% more efficient than the standard plastic unit, improved aiflow at higher delivery pressure and accurate balance. Available in Cool Blue or Satin Silver
Price: £34.00 £39.95 Including VAT at 17.5%
|  |
colour
|
|
Rap 60>90 In-line Flybar Carrier(Reference #1945)
In-Line Flybar Arm - R6H-03This in-line flybar operating arm set replaces the original 2 piece plastic arm set-up on the 60 & 90 size model. With end braces machined in alloy and control arms from 303 grade stainless steel, this unit offers a considerable increase in stiffness for a more precise control input. Available in "Cool Blue" or "Satin Silver" anodised finish.
Price: £29.74 £34.94 Including VAT at 17.5%
|  |
colour
|
|
Rap 60>90 Aileron Control Levers(Reference #1946)
Aileron Control Levers - R6C-03These control levers are very substantial and perfect for the high control loads encountered during demanding 3D style flying Machined from solid and fitted with extra wide (5mm each) twin bearings for zero side movement and high durability. Control balls are hardened steel with M3 fixing threads and come pre-installed along with a pair of socket cap style mounting screws.
Price: £29.74 £34.94 Including VAT at 17.5%
|  |
colour
|
|
Rap 60>90 Bell Hiller Mixer Arms(Reference #1947)
Bell-Hiller Mixer Arms - R6H-07These control levers are both strong and light and perfect for the high control loads encountered during demanding 3D style flying. Machined from solid and fitted with extra wide (5mm each) twin bearings for zero side movement and high durability. Control balls are hardened steel with M3 fixing threads and come pre-installed along with a pair of socket cap style mounting screws. Available in Cool Blue or Satin Silver finishes
Price: £29.74 £34.94 Including VAT at 17.5%
|  |
colour
|
|
Raptor Tail Grip Assembly RT11(Reference #1287)
Alloy tail grip set complete with stainless steel hub, pre-assembled with precision ballraces and high tensile socket fixings. Despite being machined from high strength alloy and steel, this assembly actually weighs the same as the original plastic blade grips with alloy hub ! Supplied complete with blade grip washers and plain shank mounting bolts.Available in red, blue, purple or silver finish and suitable for Raptor 30/50 V2 and Raptor 60/90.
Price: £34.03 £39.99 Including VAT at 17.5%
|  |
colour
|
